↑ 325: Stubai

• Made in West Germany.
• 270x106 mm.
• Weight: 485 g.
• Hickory Handle.
• Shaft: 27x21 mm. (Grip: 33x24 mm.)
• Fixed head.
• Hammer: 31(l)x25(w)x24(h) mm.
• Hammer head.
• Pointed pick with a pointed tip.
• Pick: 40(l)x25(h)x24(t) mm.
• Cord tied through hole in handle.
• A classic wood-handled hammer
• Pick is not suitable for pulling pitons.

↑ 022: Stubai

• Made in Austria.
• 270x130 mm.
• Weight: 600 g.
• Wood Handle.
• Shaft: 25x19 mm. (Grip: 32x22 mm.)
• Fixed Head.
• Hammer: 30(l)x26(w)x24(h) mm.
• Piton pick.
• Pick: 40(l)x17(h)x11(t) mm.
• Accessory cord tied through hole in handle.
• A small lightweight hammer.

↑ 131: Stubai

• Made in Austria.
• 270x145 mm.
• Weight: 615 g.
• Wood Handle.
• Shaft: 29x19 mm.
• Fixed Head.
• Hammer: 36(l)x26(w)x29(h) mm.
• Piton pick.
• Pick: 40(l)x16(h)x12(t) mm.
• A small lightweight with a longer pick.

↑ 182: Stubai Depitonneur

• Made in Austria [ca. 1970s].
• 330x90 mm.
• Weight: 680 g.
• Steel Shaft with Rubber Grip.
• Shaft: 18(d) mm. (Grip: 32x25 mm.)
• Fixed Head with a horizontal oval carabiner hole for attaching a funkness.
• Hammer: 27(l)x29(w)x31(h) mm.
• Pick: 8(h) mm.
• Accessory cord tied through hole in handle.
• Well-made hammer with a heavy machined head and large carabiner hole.
• The pick may be usable for head setting, but is useless for removing pitons.
• The carabiner hole allows using a funkness for removing pitons.

↑ 284: Stubai Depitonneur

• Made in Austria [ca. 1970s].
• 315x90 mm.
• Weight: 710 g.
• Steel Shaft with Rubber Grip.
• Shaft: 18(d) mm. (Grip: 32x25 mm.)
• Fixed Head with a horizontal oval carabiner hole for attaching a funkness.
• Hammer: 27(l)x29(w)x35(h) mm.
• Pick: 8(h) mm.
• Accessory cord tied through hole in handle.
• Well-made hammer with a heavy machined head and large carabiner hole.
• The pick may be usable for head setting, but is useless for removing pitons.
• The carabiner hole allows using a funkness for removing pitons.

↑ 024: Stubai Depitonneur

• Made in Austria [ca. 1970s].
• 300x100 mm.
• Weight: 705 g.
• Steel Shaft with Rubber Grip.
• Shaft: 18(d) mm. (Grip: 36x23 mm.)
• Fixed Head with a horizontal carabiner hole for attaching a funkness.
• Hammer: 30(l)x30(w)x30(h) mm.
• Pick: 8(h) mm.
• Accessory cord tied through hole in handle.
• Well-made hammer with a heavy machined head and large carabiner hole.
• The pick may be usable for head setting, but is useless for removing pitons.
• The carabiner hole allows using a funkness for removing pitons.
• Acquired in 2012 as New Old Stock.