↑ 273: Grivel Thor Alpine Rock Hammer

• Made in Italy [ca. 2007].
• 335x120 mm.
• Weight: 460 g.
• Aluminum Shaft with Rubber Grip.
• Shaft: 27x17 mm. (Grip: 31x22 mm.)
• Fixed Head with carabiner hole.
• Hammer: 33(l)x30(w)x34(h) mm.
• Hammer head.
• Flat piton pick with a neutral-clearance chisel tip with hook for piton removal.
• Pick: 59(l)x30(h)x8(t) mm.
• Handle contains a wire hook that can be used for removing pins, as a nut tool, or for pulling tent stakes.
• The Thor is not PPE and is not strong enough to safely support one's weight.

↑ 217: Grivel Thor

• Made in Italy [2025].
• 335x120 mm.
• Weight: 480 g.
• Aluminum Shaft with Rubber Grip.
• Shaft: 30x20 mm. (Grip: 31x21 mm.)
• Fixed Head with carabiner hole.
• Hammer: 34(l)x29(w)x34(h) mm.
• Hammer head.
• Flat piton pick with a neutral-clearance chisel tip with hook for piton removal.
• Pick: 59(l)x30(h)x8(t) mm.
• Web-covered elastic leash with clip.
• The handle seems to have been designed backwards.The bend provides extra clearance for hammering, but not for hooking, and results in an awkward torque when trying to remove pins.
• Instead of providing support, the finger support digs into the wrist while hooking and while prying pins loose. Finger support is not needed for hammering.
• The Thor is not PPE and is not strong enough to safely support one's weight.