These have the same screw design as the Stubai Mawras developed by Sebastian (Wastl) Mariner ca. 1961, but use a different eye design.

↑ Set 335, 614: Charlet-Moser Mawra–type Ice Screws

• Made in France [ca. 1980].
• Mawra–type ice screws. These are more difficult to place than the later tubular screws.
• Based on the Stubai Mawra ice screws.

↑ 335: Charlet-Moser Mawra–type Ice Screw

• Made in France [ca. 1980].
• Weight: 102 g.
• Overall Length: 195 mm.
• Effective size: 150x12 mm.
• Mawra–type ice screw. These are more difficult to place than the later tubular screws.
• Cadmium–plated steel.
• Stamped with "CHARLET–MOSER" and "MADE IN FRANCE" on the flat opposite the eye.
• Based on the Stubai Mawra ice screws.

↑ 614: Charlet-Moser Mawra–type Ice Screw

• Made in France [ca. 1980].
• Weight: 104 g.
• Overall Length: 196 mm.
• Effective size: 150x12 mm.
• Mawra–type ice screw. These are more difficult to place than the later tubular screws.
• Cadmium–plated steel.
• Stamped with "CHARLET," "MOSER," and "MADE IN FRANCE" on the flat opposite the eye.
• Based on the Stubai Mawra ice screws.

↑ 235: Charlet-Moser Tubular Ice Screw

• Made in France.
• Weight: 165 g.
• Overall Length: 209 mm.
• Effective size: 180x17 mm.
• Hanger engages square area on shaft for turning during placement and removal, but can be turned 90°. And slid down as far as the threads to reduce leverage on shallow placements.
• Alloy steel.
• Stamped with the Charlet–Moser logo and "MADE IN FRANCE" on top of eye plate.
• From Miles Bradshaw, 2025.