The is one of the following handled ascenders sharing the same cam safety design (which is also found on the Camp Solo):
|
|||||||||||||||||||||||||||||||||||
These are well made ascenders. All sharp edges have been removed. Admittedly, we don't have as much experience with Chinese metallurgy and quality control as we have with American and European devices, but I find nothing visibly wrong with these ascenders.Umfortunately, each of the Chinese versions (Blanzo, Magideal and SUT) have fraudulent CE marks.
All of these have comfortable handles. The location of the index finger supports on the Magideal and SUT are fine for my large hands.
I like the location of the reinforcing better on these than the location used on, say, the Kong-Bonaiti or Petzl Ascension. Accidental bending at the pit lip is still a concern, but the reinforcing helps.
The lower attachment hole could theoretically have the same safety problems as the one on Clog Version A. The attachment points are simply holes in the shell, but on the Blanzo and the C.A.M.P Pilot , the "rubber" handgrip encircles the holes. This provides some rounding but since the metal edges do not appear to be beveled, I would prefer not to tie directly into them. Considering the proximity of the attachment points to the main rope, I would recommend using a small maillon for most attachments in order to reduce the risk of sling abrasion.
The Magideal and SUT also have outer lower attachment holes, but these are too small for a normal carabiner. I'm not sure the extra holes are needed at the base. Except for the Petzl Pompe, I've never found a real need for a second hole. Some people like them, and I might find them more appealing if they were large enough for a standard carabiner to fit through.
The upper attachment holes are located very close to the main rope. A carabiner through the upper attachment hole will probably drag on the main line. Note that such a carabiner will prevent putting the ascender on or off rope, so one's climbing system must be designed accordingly.
These ascenders use several different cams, but in each case the cam is very well made and the cam teeth are very well done. The Magideal and SUT cams are essentially identical. The Blanzo and C.A.M.P Pilot, Versions B & C have the same tooth pattern, but the rows on the Blanzo are in four groups (4, 2, 2, and 3 rows per group) while aside from an isolated top tooth, all of the rows on the Version B & C Pilots are evenly spaced.
When I first encountered the design on the Camp Pilot, I found the safety took a few minutes to get used to. After minimal practice I decided that this is one of the easier safety designs to operate for stamped-frame handled eccentric cam ascenders. Single-handed operation of thse ascenders is fairly easy with the either hand. Closing an locked open ascender is accomplished with a simple push on the button.
Overall, I like these ascenders better than most stamped-frame handled ascenders. The price of the Chinese ascenders was much lower than the C.A.M.P Pilot 's.